Health-related quality of life in early onset scoliosis patients treated with the spring distraction system: what to expect in the first 2 years after surgery.

PURPOSE: The Spring Distraction System (SDS) is a novel "growth-friendly" implant for the treatment of Early-Onset Scoliosis (EOS). This prospective study aims to determine the evolution of the "24-Item Early-Onset Scoliosis Questionnaire" (EOSQ-24) scores during 2-year follow-up after SDS surgery. Secondary aims include investigating the relation between EOSQ-24 scores and EOS etiology, and evaluating the impact of an unplanned return to the operating room (UPROR) on HRQoL. METHODS: All SDS patients with at least 2-year follow-up were included. Caregivers completed the EOSQ-24 pre-operatively, post-operatively, and at 6, 12, and 24 month follow-up. Mean total and -domain scores were graphed over time. Repeated-measures ANOVA analyzed the influence of etiology on EOSQ-24 scores. Multiple regression analyzed associations between UPRORs and EOSQ-24 scores. RESULTS: Forty-nine patients were included. Mean total EOSQ-24 scores decreased from 70 pre-operatively to 66 post-operatively, then gradually increased to 75 (24 months). Most domains exhibited changes over time, with initial declines, but eventually surpassing pre-operative levels after 2-year follow-up. Neuromuscular/Syndromic patients had lower scores, but showed similar improvements over time compared with other etiologies. Multiple regression showed lower Parental Burden domain score (- 14 points) in patients with UPRORs, although no significant reductions were found in total score, or in other domains. CONCLUSION: HRQoL decreases immediately following SDS surgery but quickly recovers and exceeds pre-operative levels at 2-year follow-up in all domains. Neuromuscular/Syndromic patients have lower initial scores, but progress similarly over time. UPRORs do not influence EOSQ-24 scores, except for a negative impact on the Parental Burden domain in the short term. LEVEL OF EVIDENCE: III.

The Dutch version of the Spinal Appearance Questionnaire for adolescents with idiopathic scoliosis: patient-based cross-cultural adaptation and measurement properties evaluation.

PURPOSE: Adolescent idiopathic scoliosis (AIS) affects the appearance of spine and trunk. The Spinal Appearance Questionnaire (SAQ) assesses the perception of appearance in AIS patients. The aim of this study is to translate and culturally adapt the recommended short version of the SAQ into Dutch and to test its measurement properties. METHODS: A Dutch SAQ (14-item; appearance and expectations domains) was developed following guidelines for translation and cross-cultural adaptation. The COSMIN Study Design checklist was used for measurement properties evaluation. In this multicenter study, the Dutch SAQ, SRS-22R and NPRS (back pain) were administered to 113 AIS patients (aged 15.4 years [SD 2.2], 21.2% male). Floor and ceiling effects were evaluated for content analysis. For reliability, internal consistency (Cronbach's alpha) and test-retest reliability (ICC; n = 34) were evaluated. Predefined hypotheses of relationships with other questionnaires and between subgroups based on scoliosis severity (radiological and clinical) were tested for construct validity. Exploratory factor analysis (EFA) was performed to investigate the validity of the underlying structure of this 14-item questionnaire. RESULTS: No floor and ceiling effects were found for domains and total scores. Cronbach's alpha ranged from 0.84 to 0.89. ICCs varied from 0.76 to 0.77. For construct validity, 89% (8/9) of the predefined hypotheses were confirmed. Significant higher scores for the appearance domain were found for subgroups based on radiological (Cobb angle; > 25.0°) and clinical outcomes. (Angle of Trunk Rotation; > 9.0°). A two-factor structure was found (EV 5.13; 36.63% explained variance). CONCLUSION: The Dutch SAQ is an adequate, valid and reliable instrument to evaluate patients' perception of appearance in AIS. LEVEL OF EVIDENCE: Level I-diagnostic studies.

Monitoring of Curve Progression in Patients with Adolescent Idiopathic Scoliosis Using 3-D Ultrasound.

OBJECTIVE: The aim of the work described here was to determine whether 3-D ultrasound can provide results comparable to those of conventional X-ray examination in assessing curve progression in patients with adolescent idiopathic scoliosis (AIS). METHODS: One hundred thirty-six participants with AIS (42 males and 94 females; age range: 10-18 y, mean age: 14.1 ± 1.9 y) with scoliosis of different severity (Cobb angle range: 10º- 85º, mean: of 24.3 ± 14.4º) were included. Each participant underwent biplanar low-dose X-ray EOS and 3-D ultrasound system scanning with the same posture on the same date. Participants underwent the second assessment at routine clinical follow-up. Manual measurements of scoliotic curvature on ultrasound coronal projection images and posterior-anterior radiographs were expressed as the ultrasound curve angle (UCA) and radiographic Cobb angle (RCA), respectively. RCA and UCA increments ≥5º represented a scoliosis progression detected by X-ray assessment and 3-D ultrasound assessment, respectively. RESULTS: The sensitivity and specificity of UCA measurement in detecting scoliosis progression were 0.93 and 0.90, respectively. The negative likelihood ratio of the diagnostic test for scoliosis progression by the 3-D ultrasound imaging system was 0.08. CONCLUSION: The 3-D ultrasound imaging method is a valid technique for detecting coronal curve progression as compared with conventional radiography in follow-up of AIS. Substituting conventional radiography with 3-D ultrasound is effective in reducing the radiation dose to which AIS patients are exposed during their follow-up examinations.

Three-dimensional ultrasonography could be a potential non-ionizing tool to evaluate vertebral rotation of subjects with adolescent idiopathic scoliosis.

Background: Three-dimensional (3D) ultrasonography is nonionizing and has been demonstrated to be a reliable tool for scoliosis assessment, including coronal and sagittal curvatures. It shows a great potential for axial vertebral rotation (AVR) evaluation, yet its validity and reliability need to be further demonstrated. Materials and Methods: Twenty patients with adolescent idiopathic scoliosis (AIS) (coronal Cobb: 26.6 ± 9.1°) received 3D ultrasound scan for twice, 10 were scanned by the same operator, and the other 10 by different operators. EOS Bi-planar x-rays and 3D scan were conducted on another 29 patients on the same day. Two experienced 3D ultrasonographic researchers, with different experiences on AVR measurement, evaluated the 3D ultrasonographic AVR of the 29 patients (55 curves; coronal Cobb angle: 26.9 ± 11.3°). The gold standard AVR was determined from the 3D reconstruction of coronal and sagittal EOS radiographs. Intra-class correlation coefficients (ICCs), mean absolute difference (MAD), standard error measurements (SEM), and Bland-Altman's bias were reported to evaluate the intra-operator and inter-operator/rater reliabilities of 3D ultrasonography. The reliability of 3D ultrasonographic AVR measurements was further validated using inter-method with that of EOS. Results: ICCs for intra-operator and inter-operator/rater reliability assessment were all greater than 0.95. MAD, SEM, and bias for the 3D ultrasonographic AVRs were no more than 2.2°, 2.0°, and 0.5°, respectively. AVRs between both modalities were strongly correlated (R 2 = 0.901) and not significantly different (p = 0.205). Bland-Altman plot also shows that the bias was less than 1°, with no proportional bias between the difference and mean of expected and radiographic Cobb angles. Conclusion: This study demonstrates that 3D ultrasonography is valid and reliable to evaluate AVR in AIS patients. 3D ultrasonography can be a potential tool for screening and following up subjects with AIS and evaluating the effectiveness of nonsurgical treatments.

Automatic generation of subject-specific finite element models of the spine from magnetic resonance images.

The generation of subject-specific finite element models of the spine is generally a time-consuming process based on computed tomography (CT) images, where scanning exposes subjects to harmful radiation. In this study, a method is presented for the automatic generation of spine finite element models using images from a single magnetic resonance (MR) sequence. The thoracic and lumbar spine of eight adult volunteers was imaged using a 3D multi-echo-gradient-echo sagittal MR sequence. A deep-learning method was used to generate synthetic CT images from the MR images. A pre-trained deep-learning network was used for the automatic segmentation of vertebrae from the synthetic CT images. Another deep-learning network was trained for the automatic segmentation of intervertebral discs from the MR images. The automatic segmentations were validated against manual segmentations for two subjects, one with scoliosis, and another with a spine implant. A template mesh of the spine was registered to the segmentations in three steps using a Bayesian coherent point drift algorithm. First, rigid registration was applied on the complete spine. Second, non-rigid registration was used for the individual discs and vertebrae. Third, the complete spine was non-rigidly registered to the individually registered discs and vertebrae. Comparison of the automatic and manual segmentations led to dice-scores of 0.93-0.96 for all vertebrae and discs. The lowest dice-score was in the disc at the height of the implant where artifacts led to under-segmentation. The mean distance between the morphed meshes and the segmentations was below 1 mm. In conclusion, the presented method can be used to automatically generate accurate subject-specific spine models.

The three-dimensional coupling mechanism in scoliosis and its consequences for correction.

INTRODUCTION: In idiopathic scoliosis, the anterior spinal column has rotated away from the midline and has become longer through unloading and expansion of the intervertebral discs. Theoretically, extension of the spine in the sagittal plane should provide room for this longer anterior spinal column, allowing it to swing back towards the midline in the coronal and axial plane, thus reducing both the Cobb angle and the apical vertebral rotation. METHODS: In this prospective experimental study, ten patients with primary thoracic adolescent idiopathic scoliosis (AIS) underwent MRI (BoneMRI and cVISTA sequences) in supine as well as in an extended position by placing a broad bolster, supporting both hemi-thoraces, under the scoliotic apex. Differences in T4-T12 kyphosis angle, coronal Cobb angle, vertebral rotation, as well as shape of the intervertebral disc and shape and position of the nucleus pulposus, were analysed and compared between the two positions. RESULTS: Extension reduced T4-T12 thoracic kyphosis by 10° (p < 0.001), the coronal Cobb angle decreased by 9° (p < 0.001) and vertebral rotation by 4° (p = 0.036). The coronal wedge shape of the disc significantly normalized and the wedged and lateralized nucleus pulposus partially reduced to a more symmetrical position. CONCLUSION: Simple extension of the scoliotic spine leads to a reduction of the deformity in the coronal and axial plane. The shape of the disc normalizes and the eccentric nucleus pulposus partially moves back to the midline.

Comment on Burgos et al. Fusionless All-Pedicle Screws for Posterior Deformity Correction in AIS Immature Patients Permit the Restoration of Normal Vertebral Morphology and Removal of the Instrumentation Once Bone Maturity Is Reached. J. Clin. Med. 2023, 12, 2408.

With great interest, we read the recently published paper "Fusionless All-Pedicle Screws for Posterior Deformity Correction in AIS Immature Patients Permit the Restoration of Normal Vertebral Morphology and Removal of the Instrumentation Once Bone Maturity is Reached" by Burgos et al. [...].

The Risk and Benefits of Various Innovations in Fusion and Fusionless Surgery for AIS.

Adolescent idiopathic scoliosis is the most common variety of the condition, constituting a three-dimensional deformity of the spine and chest that primarily affects otherwise healthy adolescents [...].

Imaging Methods to Quantify the Chest and Trunk Deformation in Adolescent Idiopathic Scoliosis: A Literature Review.

Background context: Scoliosis is a three-dimensional deformity of the spine with the most prevalent type being adolescent idiopathic scoliosis (AIS). The rotational spinal deformation leads to displacement and deformation of the ribs, resulting in a deformity of the entire chest. Routine diagnostic imaging is performed in order to define its etiology, measure curve severity and progression during growth, and for treatment planning. To date, all treatment recommendations are based on spinal parameters, while the esthetic concerns and cardiopulmonary symptoms of patients are mostly related to the trunk deformation. For this reason, there is a need for diagnostic imaging of the patho-anatomical changes of the chest and trunk in AIS. Aim: The aim of this review is to provide an overview, as complete as possible, of imaging modalities, methods and image processing techniques for assessment of chest and trunk deformation in AIS. Methods: Here, we present a narrative literature review of (1) image acquisition techniques used in clinical practice, (2) a description of various relevant methods to measure the deformity of the thorax in patients with AIS, and (3) different image processing techniques useful for quantifying 3D chest wall deformity. Results: Various ionizing and non-ionizing imaging modalities are available, but radiography is most widely used for AIS follow-up. A disadvantage is that these images are only acquired in 2D and are not effective for acquiring detailed information on complex 3D chest deformities. While CT is the gold standard 3D imaging technique for assessment of in vivo morphology of osseous structures, it is rarely obtained for surgical planning because of concerns about radiation exposure and increased risk of cancer during later life. Therefore, different modalities with less or without radiation, such as biplanar radiography and MRI are usually preferred. Recently, there have been advances in the field of image processing for measurements of the chest: Anatomical segmentations have become fully automatic and deep learning has been shown to be able to automatically perform measurements and even outperform experts in terms of accuracy. Conclusions: Recent advancements in imaging modalities and image processing techniques make complex 3D evaluation of chest deformation possible. Before introduction into daily clinical practice, however, there is a need for studies correlating image-based chest deformation parameters to patient-reported outcomes, and for technological advancements to make the workflow cost-effective.

Three-dimensional correction of scoliosis by a double spring reduction system as a dynamic internal brace: a pre-clinical study in Göttingen minipigs.

BACKGROUND CONTEXT: Adolescent idiopathic scoliosis (AIS) is a major skeletal deformity that is characterized by a combination of apical rotation, lateral bending and apical lordosis. To provide full 3D correction, all these deformations should be addressed. We developed the Double Spring Reduction (DSR) system, a (growth-friendly) concept that continuously corrects the deformity through two different elements: A posterior convex Torsional Spring Implant (TSI) that provides a derotational torque at the apex, and a concave Spring Distraction System (SDS), which provides posterior, concave distraction to restore thoracic kyphosis. PURPOSE: To determine whether the DSR components are able to correct an induced idiopathic-like scoliosis and to compare correction realized by the TSI alone to correction enforced by the complete DSR implant. STUDY DESIGN/SETTING: Preclinical randomized animal cohort study. PATIENT SAMPLE: Twelve growing Göttingen minipigs. OUTCOME MEASURES: Coronal Cobb angle, T10-L3 lordosis/kyphosis, apical axial rotation, relative anterior lengthening. METHODS: All mini-pigs received the TSI with a contralateral tether to induce an idiopathic-like scoliosis with apical rotation (mean Cobb: 20.4°; mean axial apical rotation: 13.1°, mean lordosis: 4.9°). After induction, the animals were divided into two groups: One group (N=6) was corrected by TSI only (TSI only-group), another group (N=6) was corrected by a combination of TSI and SDS (DSR-group). 3D spinal morphology on CT was compared between groups over time. After 2 months of correction, animals were euthanized. RESULTS: Both intervention groups showed excellent apical derotation (TSI only-group: 15.0° to 5.4°; DSR-group: 11.2° to 3.5°). The TSI only-group showed coronal Cobb improvement from 22.5° to 6.0°, while the DSR-group overcorrected the 18.3° Cobb to -9.2°. Lordosis was converted to kyphosis in both groups (TSI only-group: -4.6° to 4.3°; DSR-group: -5.2° to 25.0°) which was significantly larger in the DSR-group (p<.001). CONCLUSIONS: The TSI alone realized strong apical derotation and moderate correction in the coronal and sagittal plane. The addition of distraction on the posterior concavity resulted in more coronal correction and reversal of induced lordosis into physiological kyphosis. CLINICAL SIGNIFICANCE: This study shows that dynamic spring forces could be a viable method to guide the spine towards healthy alignment, without fusing it or inhibiting its growth.

Convex-concave and anterior-posterior spinal length discrepancies in adolescent idiopathic scoliosis with major right thoracic curves versus matched controls.

PURPOSE: The apical deformation in adolescent idiopathic scoliosis (AIS) is a combination of rotation, coronal deviation and passive anterior lengthening of the spine. In AIS surgery, posterior-concave lengthening or anterior-convex shortening can be part of the corrective maneuver, as determined by the individual surgeon's technique. The magnitude of convex-concave and anterior-posterior length discrepancies, and how this needs to be modified to restore optimal spinal harmony, remains unknown. METHODS: CT-scans of 80 pre-operative AIS patients with right convex primary thoracic curves were sex- and age-matched to 80 healthy controls. The spinal length parameters of the main thoracic curves were compared to corresponding levels in controls. Vertebral body endplates and posterior elements were semi-automatically segmented to determine the length of the concave and convex side of the anterior column and along the posterior pedicle screw entry points while taking the 3D-orientation of each individual vertebra into account. RESULTS: The main thoracic curves showed anterior lengthening with a mean anterior-posterior length discrepancy of + 3 ± 6%, compared to a kyphosis of - 6 ± 3% in controls (p < 0.01). In AIS, the convex side was 20 ± 7% longer than concave (0 ± 1% in controls; p < 0.01). The anterior and posterior concavity were 7 and 22 mm shorter, respectively, while the anterior and posterior convexity were 21 and 8 mm longer compared to the controls. CONCLUSIONS: In thoracic AIS, the concave shortening is more excessive than the convex lengthening. To restore spinal harmony, the posterior concavity should be elongated while allowing for some shortening of the posterior convexity.

Perioperative Management of an Adolescent Fontan Patient with Narrowing of the Aortopulmonary Space for Posterior Scoliosis Surgery.

Congenital cardiac patients who received neonatal reconstructive aortic arch surgery are at risk of aortopulmonary space narrowing with compression of the left pulmonary artery and left main bronchus (LMB) later in life. We discuss a challenging adolescent single ventricle patient who presented for surgical treatment of a non-idiopathic thoracic scoliosis (posterior spinal fusion) with severe stenosis of the LMB and left pulmonary artery due to a narrow aortopulmonary space. Careful preoperative imaging, evaluation, and decision making resulted in successful surgical treatment and uneventful perioperative course.

The Spring Distraction System for Growth-Friendly Surgical Treatment of Early Onset Scoliosis: A Preliminary Report on Clinical Results and Safety after Design Iterations in a Prospective Clinical Trial.

Background: The Spring Distraction System (SDS) is a dynamic growth-friendly implant to treat early onset scoliosis (EOS). Previous SDS studies showed promising results in terms of curve correction and complication profile. Nevertheless, complications did occur, which led to modifications in the implant design. The main iterations were a larger rod diameter and a more sagittal stable sliding mechanism. The purpose of this study was to investigate the performance of these iterations. Methods: All patients treated with the modified SDS and >1 year follow-up were included. Radiographic outcomes, severe adverse events (SAEs), unplanned returns to the operating room (UPRORs) and health-related quality of life (HRQoL) were investigated. Results: Seventeen EOS patients (three congenital, four idiopathic, nine neuromuscular, one syndromic) were included. Mean age at surgery was 9.5 ± 2.5 years. Similar to the first generation SDS, about 50% initial correction was achieved and maintained, and spinal growth was near physiological. Most importantly, SAEs and UPRORs were diminished and favorable with 0.10/patient/year. In addition, HRQoL increased during the first year postoperatively, indicating the implant was well accepted. Conclusion: These preliminary results indicate that the iterations of the SDS are effective in terms of reducing SAEs and UPRORs and increasing HRQoL in patients with EOS.

Comment on Grivas et al. Morphology, Development and Deformation of the Spine in Mild and Moderate Scoliosis: Are Changes in the Spine Primary or Secondary? J. Clin. Med. 2021, 10, 5901.

With great interest, we have read the article entitled "Morphology, Development and Deformation of the Spine in Mild and Moderate Scoliosis: Are Changes in the Spine Pri-mary or Secondary [...].

Calculation of the 3-D femoral component's orientation in total hip arthroplasty using a trigonometric algorithm.

Femoral component orientation plays a key role in implant stability and therefore the success rate of total hip arthroplasty. To date, this topic has been studied using various definitions and a variety of imaging modalities and protocols. The aim of this study is a proof of concept that a new algorithm can be used to describe the femoral component's 3D orientation on the three orthogonal anatomical planes and relative to its mechanical axis using input from two orthogonal planes. CT scans of 18 patients with a total of 22 hip arthroplasties were collected. From these, orthogonal coronal and sagittal projections of the complete femur were acquired in the scanning position (MIPs) and relative to the femoral mechanical axis (corrected MIPs). On these images, the orientation of the neck of the femoral component in space and relative to the femoral axis, respectively, was measured by coronal inclination (CIF), sagittal inclination (SIF) and transverse version (TVF). With the algorithm, TVF was also calculated based on CIF and SIF. Differences between measured and calculated TVF and intra- and inter-observer reliability were evaluated using intra-class correlation coefficients (ICC). The error of non-orthogonal imaging (85° angle between the sagittal and coronal reconstructions) was tested on a third series of MIPs. The ICC between the calculated TVF and manually measured TVF, in space and relative to the femoral axis, was 0.98 for both with median absolute differences of 1.3 and 1.5°. For non-orthogonal images this was 0.70 with a median absolute difference of 5°. ICCs for intra-observer and inter-observer reliability for the calculated TVF values were 0.98 and 0.88, respectively. With this algorithm the transverse orientation of the neck of the femoral component can be assessed in space and relative to the mechanical femoral axis by combining its sagittal and coronal orientation. As long as the imaging visualizes two orthogonal planes, the orientation of an implant can be assessed in 3-D, regardless of the imaging modality.

Reply to Weiss, H.-R. Comment on "Costa et al. The Effectiveness of Different Concepts of Bracing in Adolescent Idiopathic Scoliosis (AIS): A Systematic Review and Meta-Analysis. J. Clin. Med. 2021, 10, 2145".

We would like to thank you for the opportunity to reply to the comments in regard of the letter by Dr. Weiss [...].

Short-term effect and effect on rate of lung function decline after surgery for neuromuscular or syndromic scoliosis.

INTRODUCTION: Understanding the impact of scoliosis surgery on lung function is important for counseling patients about risks and benefits of surgery. We prospectively compared the trends in lung function test (LFT) results before and after scoliosis surgery in children with neuromuscular diseases or dysmorphic syndromes. We hypothesized a stabilization. METHODS: We prospectively included children with neuromuscular or syndromic scoliosis able to perform LFTs. We studied (forced) vital capacity ([F]VC), ratio of forced expiratory volume in 1 s (FEV1 ) and FVC, and peak expiratory flow (PEF). Preoperative LFT results were compared with results 3-4 months after surgery. The mean monthly change in LFT results up to 2 years after surgery was compared with the preoperative natural history using linear mixed-effects models. RESULTS: We included 43 patients. No significant change was observed in absolute values of (F)VC, FEV1 /FVC, and PEF before and after surgery. In 23 neuromuscular patients median standardized VC, FVC, and PEF decreased significantly after surgery from 43% to 33%, 42% to 31%, and 51% to 40%, respectively. In 20 syndromic patients, median FVC decreased from 68% to 65%. The monthly rate of change in FVC did not change significantly in both groups with a mean difference of 0.18% (95% CI: -0.27, -0.61) and -0.44% (95% CI: -1.05, 0.16). CONCLUSION: No stabilization of lung function 3-4 months after scoliosis surgery was observed in children with neuromuscular and syndromic scoliosis with restrictive lung function disease. The effect on the rate of lung function decline remains inconclusive.

The role of the femoral component orientation on dislocations in THA: a systematic review.

INTRODUCTION: Dislocation remains a major complication in total hip arthroplasty (THA), in which femoral component orientation is considered a key parameter. New imaging modalities and definitions on femoral component orientation have been introduced, describing orientation in different planes. This study aims to systematically review the relevance of the different orientation parameters on implant stability. METHODS: A systematic review was performed according to the PRISMA guidelines to identify articles in the PubMed and EMBASE databases that study the relation between any femoral component orientation parameters and implant stability in primary THA. RESULTS: After screening for inclusion and exclusion criteria and quality assessment, nine articles were included. Definitions to describe the femoral component orientation and methodologies to assess its relevance for implant stability differed greatly, with lack of consensus. Seven retrospective case-control studies reported on the relevance of the transversal plane orientation: Low femoral- or low combined femoral and acetabular anteversion was statistical significantly related with more posterior dislocations, and high femoral- or combined femoral and acetabular anteversion with anterior dislocations in two studies. There were insufficient data on sagittal and coronal component orientation in relation to implant stability. CONCLUSION: Because of incomparable definitions, limited quality and heterogeneity in methodology of the included studies, there is only weak evidence that the degree of transverse component version is related with implant stability in primary THA. Recommendations about the optimal orientation of the femoral component in all three anatomical planes cannot be provided. Future studies should uniformly define the three-dimensional orientation of the femoral component and systematically describe implant stability.

Disc and Vertebral Body Morphology From Birth to Adulthood.

STUDY DESIGN: Cross-sectional. OBJECTIVE: The aim of this study was to describe the morphology of intervertebral discs and vertebral bodies during growth in asymptomatic children and adolescents. SUMMARY OF BACKGROUND DATA: Earlier studies demonstrated that spinal growth occurs predominantly in vertebral bodies. This axiom introduced a vertebral-body-focus for unravelling etiological questions and achieve growth-modulation in young spinal deformity patients. Recent studies show the importance of the intervertebral discs in the early phases and possible etiology of pediatric spinal deformities. There is presently a paucity of 3D morphometric data of spinal elements during growth. METHODS: A database of 298 patients aged 0 to 21 that have received a computed tomography scan for indications not related to the spine was analyzed. Custom made software was used to semi-automatically measure intervertebral disc and vertebral body morphology, corrected for orientation in all 3 planes. RESULTS: Vertebral body height increased from birth up to adulthood, from 4-to-14 mm in the cervical, 6 to 20 mm in the thoracic, and 9 to 28 mm in the lumbar spine. This increase was 0.70 mm/year in males, more pronounced than females with 0.62 mm/year (P = 0.001). Lumbar discs increased throughout growth from 4.4 to 9.0 mm, whereas thoracic discs only increased from 3.5 to 4.9 mm at age 4 and remained stable afterwards, similarly for cervical discs. The disc transverse surface area increased greatly and consistently throughout growth. Disc slenderness was stable in the lumbar spine during growth, but decreased in the thoracic and cervical spine. Overall, discs were more slender in females, especially around early adolescence. CONCLUSION: The spine grows predominantly in the vertebral bodies. Thoracic discs increase in height only during the first years, whereas the transverse surface area continues to increase throughout growth, thus discs slenderness decreases. Relatively, female discs remained slenderer around growth-spurt. These measurements may assist future studies on the role of disc morphology in the etiology and treatment of spinal deformity.Level of Evidence: 4.